Getting Started - Espaρol
How It's Made
Titrating Oil
Making A Small Batch
Washing A Small Batch
3/27 Conversion Test
Carboy Methoxide Mixer
'Dixie Cup' Scale
Fueling Station
Oil Collection Tank
Scales For Biodiesel
Standpipe Wash Tank
Titration Station
Biodiesel Safety
Buying Methanol
Storage Considerations
Testing Oil For Water
Quantitative Water Test
Negotiating For WVO
Filtering Oil
Pretreating Oil
Solar Preheat Oil
Bubblewashing Biodiesel
Drying Washed Biodiesel
Breaking Emulsions
Testing For Soap
Titrating with Turmeric
5% Water Prewash
Acid/Base Processing
Base/Base Processing
Online Resources
Tutorial Page Forum
Biodiesel Pictures
Yahoo Biodieselbasics
InfoPop Biodiesel


Solar Preheat Oil
by Rick da Tech of B100 Supply
Questions? Comments? Feedback? Click Here

Use Solar Preheating to liquify oils before filtering and processing. There three methods that are in use by homebrewers.

1. Paint a 55-gallon drum black and sit it in the sun. This works really well in the summer. This calls for moving drums full of oil, which can be a problem for some. Methods of moving full drums of vegetable oil include tilt and roll, using a drum truck ($150 and up) or a drum dolly ($30 and up). A drum dolly is inexpensive but requires an even surface and is difficult to move from drum to drum. A drum truck is expensive, but does not need an even surface and can quickly be moved from drum to drum.

2. Build a solar bucket or drum box. This works year round.

5 gallon solar box.

110 gal cone bottom solar box.
Both can be found at http://www.localaction.biz 


3) Use a solar water heating panels. This method seems to be used mostly to heat clean oil for processing and can be used to get oils up to reaction temp.

http://biodiesel.infopop.cc/  discussion using solar panel to heat WVO.

http://biodiesel.infopop.cc/  another thread on using solar panels


$25 Solar Box that holds 2 55-gallon drums:

Materials:
2 sheets 4’x 8’ x ½” Styrofoam insulation
1 clear plastic sheet 60” x 48”
1 roll duct tape
1 can black paint


1) Cut one Styrofoam sheet in half one half will be the bottom and the other half the back
2) Cut the second sheet in quarters 2’ x 4’
3) Cut one of the 2’ x 4’ panels from corner to corner making 2 equal sized triangle shaped pieces.
4) Tape the pieces together using duct tape. Leaving the back piece taped only on the top to act as a door for the box. see attachment
5) Paint the inside black
6) Cover the opening with clear plastic.


Collaborative Biodiesel Tutorial - @copy; Copyright 2005 - All Rights Reserved